Sale!

SolarEdge SE P400 400W OPTIMIZER

$84.99

In stock

Description

Solaredge, Optimizer 400W, Add-On Box for one 72 or 96 cell module, 8-80V, 10A, MC4-compatible In, MC-4 compatible out. , 47″ PV wire, UL 1000VDC, P400-5NC4ARM

The SolarEdge module add-on power optimizer is connected by installers to C-Si and thin-film modules. Ease of installation is completed by simply clipping the power optimizer to the module frame or by attaching it to the rail with a single screw. The add-on power optimizer is compatible with Zep Groove framed modules. The SolarEdge power optimizer attaches to the module frame with the certified Zep Compatible™ bracket without screws which reduces on-roof labor and mounting costs.

 

Mechanical Data

Technology: Optimizer
Dimensions: 5.00 x 5.97 x 1.89 Inches
Weight: 2.05 lbs
Maximum Allowed System Voltage: 1000 VDC
Compatible Inverters: All SolarEdge Single Phase and Three Phase Inverters
Input Connector: MC4 Compatible
Output Wire Type/Connector: Double Insulated; MC4 Compatible
Output Wire Length: 3.90 Feet
Operating Temperature Range: -40 to +85°C
Protection Rating: IP68/NEMA6P
Relative Humidity: 0-100%
EMC Compliance: FCC Part15 Class B, IEC61000-6-2, IEC61000-6-3
Safety: IEC62109-1 (Class II Safety), UL1741
RoHS Compliance: Yes

Electrical Data

Rated Input DC Power: 400 Watts
Absolute Maximum Input Voltage: 80 VDC
MPPT Operating Range: 8-80 Volts
Maximum Short Circuit Current (Isc): 10 ADC
Maximum DC Input Current: 12.50 ADC
Maximum Efficiency: 99.50%
Weighted Efficiency: 98.80%
Maximum Output Current: 15 ADC
Maximum Output Voltage: 60 VDC
Safety Output Voltage per Power Optimizer: 1 VDC

Additional information

Weight 2.05 lbs
Dimensions 5.00 × 5.97 × 1.89 in